Table of Contents
Advertisement
Note: In order to receive Trap information, switch has to be
configured with Trap IP and Trap Events in Web browser, which
are available in the Trap Setting Menu (see Page 47 for detail).
Add Item:
To add a device to the Monitor List manually, enter the
IP Address of the device that you want to monitor.
Delete Item:
To delete the device in the Monitor List.
Device Setting
You can set the device by using the function key in the Device Setting
Dialog box.
Configuration Setting:
In this Configuration Setting, you can set the IP Address, Subnet
Mask, Gateway, Set Trap to (Trap IP Address), System name,
Location and DHCP setting.
In factory default, the IP address of the DES-2108 will atomically
assign from DHCP server (DHCP enabled). If your network has no
DHCP server, the DES-2108 will fail to get IP address, and the IP
address of DES-2108 will be assigned to default IP address of
192.168.0.1 and netmask is 255.255.255.0.
Select the device in the Discovery List or Monitor List and press
"Configuration setting" button, then the Configuration Setting
window will pop out as Figure 10, after filling up the data that you
want to change, you must fill up the password and press the "Set" to
process the data changed immediately.
21
Advertisement
Table of Contents
