Table of Contents
Advertisement
Login to Web Manager
Before you configure this device, note that when the Web Smart
Switch is configured through an Ethernet connection, make sure the
manager PC must be set on same the IP network. For example, when
the default IP address of the Web Smart Switch is 192.168.0.1, then
the manager PC should be set at 192.168.0.x (where x is a number
between 2 and 254), and the default subnet mask is 255.255.255.0.
Open
the
http://192.168.0.1 (the factory-default IP address setting) to the
address location.
Or through the Web Management Utility, you do not need to
remember the IP Address, select the device shown in the Monitor List
of the Web Management Utility to settle the device on the Web
Browser.
When the following dialog page appears, remain enter the default
password "admin" and press Login to enter the main configuration
window.
web
browser
program
and
Figure 13.
Figure 14.
25
Enter
IP
address
Advertisement
Table of Contents
