Table of Contents
Advertisement
create snmp host
Purpose
Syntax
Description
Parameters
Example usage:
To create an SNMP host to receive SNMP messages:
show snmp host
Used to create a recipient of SNMP traps
generated by the Switch's SNMP agent.
create snmp host <ipaddress> {vid <vlan_id>}
trap_community <community_string>
This command creates a recipient of SNMP traps
generated by the Switch's SNMP agent
<ipaddress> - The IP address of the remote
management station that will serve as the SNMP
host for the Switch.
<vlan_id> - Specific the 802.1Q VLAN ID of the
SNMP recipient host. The range is between 1 to
4094.
trap_community <community_string> - An
alphanumeric string of up to 20 characters used
to authorize a remote SNMP manager to access
the Switch's SNMP agent.
Figure 95. create snmp host command
94
Advertisement
Table of Contents
