D-Link DES-2108 User Manual page 61

Example usage:
To configure the Switch contact to "Eddy_Chou":
config snmp system_name
Purpose
Syntax
Description
Parameters
Example usage:
To configure the Switch name for "Sales-SW-1":
Figure 54. config snmp system_contact command
Used to configure the name for the Switch.
config snmp system_name <system_name>
The config
configures the name of the Switch.
<system_name> - A maximum of 20 character
can be used, space character is not allowed.
Figure 55. config snmp system_name command
snmp system_name
57
command