Table of Contents
Advertisement
Each command is listed, in detail, in the following sections.
create snmp community
Purpose
Syntax
create snmp community
Description
Parameters
Used to create an SNMP community string to
define the relationship between the SNMP
manager and an agent. The community string
acts like a password to permit access to the
agent on the Switch. One or more of the following
characteristics can be associated with the
community string.
create snmp community <community_string
20> [read_only | read_write]
This command is used to create an SNMP
community string and to assign access-limiting
characteristics to this community string.
<community_string 20> - An alphanumeric
string of up to 20 characters that is used to
identify members of an SNMP community. This
string is used like a password to give remote
SNMP managers access to MIB objects in the
Switch's SNMP agent.
read_only - Specifies that SNMP community
members using the community string created
with this command can only read the contents of
the MIBs on the Switch.
read_write - Specifies that SNMP community
members using the community string created
with this command can only read from and write
to the contents of the MIBs on the Switch.
91
Advertisement
Table of Contents
