Table of Contents
Advertisement
Modify Trap: To modify previously defined SNMP Trap, click on
the ID parameter to enter to the selected SNMP Trap to configure its
community name, IP address and events. Press "Apply" to save
change of the SNMP Trap.
Figure 34. Modify SNMP Trap
Static MAC
The Static MAC function allows you to enable the Switch to forward
the data packets to specific MAC address and specific port. Only
Static MAC function enabled ports will follow the Static MAC rule
from the Static MAC list.
Enabled / Disabled: Selecting the enable or disable Static MAC
function on the Switch. Select "Enabled" to enabling the Static MAC
function on the Switch, the Switch's auto learning function will be
disable except the specific port (set in the "Disable auto learning
excluding uplink port" setting), and the Switch will forward data
following the Static MAC Address Table to the specific port. Select
"Disabled", the Switch will learn and build MAC address table
automatically and the Switch will forward data following the auto
learning MAC Address Table to the specific port.
40
Advertisement
Table of Contents
