Table of Contents
Advertisement
config pvid
Purpose
Syntax
Description
Parameters
Example usage:
To configure the 802.1Q Port VLAN_ID:
Port Mirroring Commands
The port mirroring commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
config mirror port
Used to configure the 802.1Q Port VLAN ID and priority.
config pvid <portlist> <vlanid 1~4094> priority
<0~7>
This command allows you to configure the 802.1Q Port
VLAN ID and priority.
<portlist> - A port or range of ports to configure to the
specified PVID.
<vlanid 1~4094> - To configure the 802.1Q VLAN ID to
the specified ports.
priority <0~7> - To configure the priority to the
specified PVID.
Figure 78. config pvid command
Parameters
[enable | disable] {<port>
ports <portlist> [rx | tx |both]}
75
source
Advertisement
Table of Contents
