Table of Contents
Advertisement
IEEE 802.1Q VLAN:
VID Table Setting: select the VID group that you set.
When you select VID Table Setting, press "Add new VID" to create
new VID group, from port 01 ~ port 48, select Untag Port, Tag Port or
Not Member for each port. To save the VID group, press "Apply"
button. To remove the selected VID group, select the VID group and
press "Remove the VID" button. To modify the VID group setting,
select the VID group and change the setting, and press "Apply" button
to save the settings.
Figure 22. 802.1Q VID Table Setting
Port VID Setting:
When you select Port VLAN setting, fill in each port's PVID value
between 1 and 4094.
Figure 23. 802.1Q Port VID Setting
Note: If you change the VLAN mode to the other VLAN mode, the
current VLAN setting will be erased.
31
Advertisement
Table of Contents
