Device Setting - D-Link DGS-1224T Manual

Device Setting

You can set the device by using the function key in the Device Setting
Dialog box.
Configuration Setting: In this Configuration Setting, you can set the
IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),
System name and Location.
Select the device in the Discovery list or Monitor List and press this
button, then the Configuration Setting window will pop out as ,
Figure 10
after filling up the data that you want to change, you must fill up the
password and press the "Set" to process the data changed immediately.
Figure 10. Configuration Setting
Password Change: You can use this Password Change when you
need to change the password, fill in the password needed in the dialog
box and press "Set" button to proceed the password change
immediately.
Figure 11. Password Change
21