Example usage:
To set up static router ports:
Figure 99. config router_ports command (add static router ports)
To delete static router ports:
Figure 100. config router_ports command (delete static router ports)
enable igmp snooping
Purpose
Syntax
Description
Parameters
Used to enable IGMP snooping on the Switch.
enable igmp snooping {forward_mcrouter_only}
This command allows you to enable IGMP snooping
on the Switch. If forward_mcrouter_only is specified,
the Switch will only forward all multicast traffic to the
multicast router, only. Otherwise, the Switch
forwards all multicast traffic to any IP router.
None.
98