Keyboard Test - Toshiba T2100 Series Maintenance Manual

3.6

Keyboard Test

To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter
and follow the directions displayed on the screen. The Keyboard test contains four subtests
that test the T2100/T2105 Series computer's keyboard actions. Move the highlight bar to the
subtest you want to execute and press Enter .
Subtest 01 Pressed key display (82/84)
NOTE: The Num Lock and the Overlay mode must be off to execute
this subtest.
When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to an "*" character. Holding a key down enables the auto-repeat
function which causes the key's display character to blink.
[[[
If test OK, Press [Del] [Enter] Key
3-12
Press Key Display ]]]
T2100 Series