Toshiba T2100 Series Maintenance Manual page 124

Installing the Optional Memory Module
To install an optional memory module in the computer, follow the steps below and refer to
Figures 4-6 back through 4-4.
1. Turn the computer over and insert the memory module, connectors first, into the
computer's connectors. Note the notch at the corner of the module. This notch
should be on the right as you insert the module (Figures 4-6).
2. The module is held up by springs in the computer's socket. Gently push the
module into place until two latches close over each side.
3. Fit the socket cover's latches into place and seat the cover (Figure 4-5).
4. Secure the two M2x4 silver screws (Figure 4-4).
5. Install the battery back as described in Section 4.2.
6. The T2100/T2105 Series computer automatically configures all additional memory
as extended memory.
4-10
Figure 4-6 Inserting the memory module
T2100 Series