Toshiba T2100 Series Maintenance Manual page 145

Installing the FL Inverter Board
To install the T2100/T2100CS's FL inverter board, follow the steps below and refer to Figure
4-22.
1. Connect the volume cable to the volume board.
2. Secure the volume board with the one M2.5x6 screw.
3. Connect the FL inverter cable and FL cable to CN1 and CN2 on the FL inverter
board.
4. Rotate the FL inverter board, seat it in place, and route the cables so they will not
be pinched by the display cover or other component.
5. Secure the FL inverter board with two M2.5x6 screws.
6. Install the display mask, optional PCMCIA card, optional memory card and battery
pack as described in Sections 4.11, 4.4, 4.3 and 4.2.
T2100 Series
4-31