Toshiba T2100 Series Maintenance Manual page 132

4.7 Top Cover/Display Assembly/Speaker
Removing the Top Cover, Display Assembly, and Speaker
To remove the computer's top cover, display assembly, and speaker, follow the steps below
and refer to Figures 4-14 to 4-16.
1. Turn off the power to the computer, then disconnect the AC power cord and all
external cables connected to the computer.
2. Remove the battery pack, optional PCMCIA card, optional memory module,
keyboard and hard disk drive as described in Sections 4.2 through 4.6.
3. Turn the computer over and remove three M2.5x8 silver screws securing the
cover (Figure 4-14).
4-18
Figure 4-14 Removing the top cover screws
T2100 Series