Toshiba T2100 Series Maintenance Manual page 151

Installing the T2100CS LCD Module
To install the T2100CS's LCD module, follow the steps below and refer to Figure 4-25.
1. Connect the display cable to the LCD module, and carefully rotate the LCD
module into the LCD cover. Be sure the volume cable and FL cable extend out the
side of the LCD module.
2. Secure four M2.5x6 screws with ground cables to the LCD module.
3. Install the FL inverter board, display mask, optional memory module, optional
PCMCIA card and battery pack as described in Sections 4.12, 4.11, 4.4, 4.3 and
4.2.
T2100 Series
4-37