Toshiba T2100 Series Maintenance Manual page 148

4.14 T2100 FL
Removing the T2100 FL
To remove the T2100's FL, follow the steps below and refer to Figure 4-24.
1. Turn off the power to the computer, then disconnect the AC power cord and all
external cables connected to the computer.
2. Remove the battery pack, optional memory card, optional PCMCIA card, display
mask, FL inverter, and LCD module as described in Sections 4.2, 4.3, 4.4, 4.11,
4.12, and 4.13.
3. Peel the tape off the lamp cover, then remove three M1.5x3 brass flat-head
screws securing the cover and take off the FL cover.
4. Remove the FL.
4-34
Figure 4-24 Removing the FL
T2100 Series