Accessing From The Web Browser - Panasonic PT-VW350 Operating Instructions Manual

Accessing from the
1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is
panasonic (lower case).
4) Click [OK].
f The [Projector status] page is displayed.
Note
f If you use a web browser to control the projector, set [NETWORK CONTROL] to [ON] in [NETWORK]
f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector
from multiple computers.
f Change the password first.
f Access will be locked for few minutes when an incorrect password is entered three times consecutively.
f Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to
be controlled properly if it is set with a browser that does not have this function enabled.
f If the screen for the web control is not displayed, consult your network administrator.
f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
Chapter 4 Settings - [NETWORK] menu
web browser
(x page 93)
(x page 80).
ENGLISH - 83