[Security] Menu; [Password]; [Password Change] - Panasonic PT-VW350 Operating Instructions Manual

[SECURITY] menu

On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 47) for the operation of the menu screen.
f When the projector is used for the first time Initial password: Press
button.
fAfter selecting the item, press asqw to set.
Attention
f When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset
password and then continue operations of the [SECURITY] menu.
f When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f The entered password is displayed with "" mark on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.

[PASSWORD]

The [PASSWORD] screen is displayed when the power is turned on, [INITIALIZE ALL] is executed or [INITIALIZE] in the
[NETWORK] menu is executed.
<v/b> button on the control panel or on the remote control.
1) Press as to select [PASSWORD].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f The [PASSWORD] setting is set to [OFF] by the factory default.
f Change the password periodically that is hard to guess.
f The security password is enabled after setting [PASSWORD] to [ON], turning the power off and disconnecting the power
plug from the power outlet.

[PASSWORD CHANGE]

Change the security password.
1) Press as to select [PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
3) Press asqw or number buttons (<1>-<6>) to set the password.
f Up to eight button operations can be set.
4) Press the <ENTER> button.
5) Re-enter the password for the confirmation.
6) Press the <ENTER> button.
76 - ENGLISH
Chapter 4 Settings - [SECURITY] menu
When the entered password is incorrect, the operation will be restricted to the power standby
Disables the security password entry.
Enables the security password entry.
in order, and press the <ENTER>
awsqawsq