Chapter 3 Basic Operations - Basic operations by using the remote control
Using the AV MUTE function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and image temporarily.
button
1)
Press the <AV MUTE> button on the remote control.
f The audio and image turn off.
2)
Press the <AV MUTE> button again.
f The audio and image turn on.
Note
f When [MIC] is set to [ON], the audio of MIC can be output even during AV MUTE.
Using the P-TIMER function
You can operate the presentation timer function.
Presentations, etc. can be performed while checking the elapsed time or time remaining in the preset time.
button
1)
Press the <P-TIMER> button on the remote control.
f The count is started.
f The elapsed time or the remaining time is displayed at the bottom right of the projected image.
2)
Press the <P-TIMER> button again.
f The count is stopped.
3)
Press the <P-TIMER> button again.
f The count is resumed.
Note
f Pressing the <P-TIMER> button for at least 3 seconds to release the P-TIMER function.
f For details, please refer to the [DISPLAY OPTION] menu → [P-TIMER] (x page 66).
Using the DIGITAL ZOOM function
(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
buttons
1)
Press the <D.ZOOM +> button or <D.ZOOM -> button on the remote control.
f The moving screen is displayed.
f The [DIGITAL ZOOM] individual adjustment screen is displayed when executing the menu operation. For details, refer
to [DISPLAY OPTION] → [OTHER FUNCTIONS] (x page 67).
f You can press the <RETURN> button to cancel the function.
r Button functions during [DIGITAL ZOOM]
Operation menu
Operation
Press the <D.ZOOM +> button or w button.
Press the <D.ZOOM -> button or q button.
Adjustment
Increases magnification.
Decreases magnification.
ENGLISH - 43
Adjustment
range
1.0 ~ 3.0