Connecting Terminals - Panasonic PT-VW350 Operating Instructions Manual

r Connecting terminals
1
5
1 <COMPUTER 1 IN> terminal
This is the terminal to input RGB or YC
signals.
2 <COMPUTER 2 IN/ 1 OUT> terminal
This is the terminal to input RGB signals.
Or output the RGB or YC
external monitor.
3 <HDMI IN> terminal
This is the terminal to input HDMI signals.
4 <LAN> terminal
This is the LAN terminal to connect to the network.
5 <SERIAL IN> terminal
This is the RS-232C compatible terminal to
externally control the projector by connecting a
computer.
6 <VIDEO IN> terminal
This is the terminal to input video signals.
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
22 - ENGLISH
Chapter 1 Preparation - About your projector
2
6 7
C /YP P
B R B R
C /YP P signals to
B R B R
3
8 9
10 11
7 <AUDIO IN 3 (L/R)> terminal
This is the terminal to input audio signals.
Left input (L) and right input (R) are provided for
the <AUDIO IN 3> terminal.
8 <AUDIO IN 1> terminal
This is the terminal to input audio signals.
9 <AUDIO IN 2 (MIC IN)> terminal
This is the terminal to input audio signals.
Or connect the MIC to this terminal.
10 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal
to the projector.
11 <S-VIDEO IN> terminal
This is the terminal to input s-video signals.
12 Security slot
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
4
12