[Test Pattern]; [Filter Counter]; [Initialize All] - Panasonic PT-VW350 Operating Instructions Manual

[TEST PATTERN]

Displays the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before
performing various adjustments.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
f The test pattern with the [PATTERN CHANGE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
All white → Color bars → White cross on the black background → Black cross on the white background → Cross hatch
→ All white →...
f When you press the <MENU> button or <RETURN> button, it will exit the test pattern and return to the sub-menu of
[PROJECT SETUP].
Note
f The initial setting is All white. The initial screen is

[FILTER COUNTER]

This function is used to reset the filter use time and set the notification display.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER
RESET]
Setting [TIMER]
1) Press as to select [TIMER].
2) Press qw to switch the setting of the timer.
f The items will switch each time you press the button.
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H]
[FILTER COUNTER RESET]
1) Press as to select [FILTER COUNTER RESET].
2) Press the <ENTER> button.
f The [FILTER COUNTER RESET] screen is displayed.
3) Press qw to select [OK] and then press the <ENTER> button.

[INITIALIZE ALL]

Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE ALL].
2) Press the <ENTER> button.
f The [INITIALIZE ALL] screen is displayed.
3) When the confirmation is displayed, press qw to select [OK] and then press the <ENTER> button.
f The [NOW INITIALIZING...] screen is displayed and then the [POWER OFF.] screen will be displayed.
4) Press the <ENTER> button.
f The operation of other buttons is disabled.
f The initial setting (display language) screen will be displayed when turning on the projector next time.
Note
f The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of
[NETWORK] cannot be returned to the factory default values. For details about the initialization of [NETWORK], please refer
to [NETWORK] → [INITIALIZE] (x page 81).
Chapter 4 Settings - [PROJECTOR SETUP] menu
Cross hatch
Displays the using time of the filter.
Sets the timer when you want to display an alert message of filter replacement.
Resets the filter counter.
if you have assigned it to the <FUNCTION> button.
→ [7000 H]
ENGLISH - 75