Corner Correction - Panasonic PT-VW350 Operating Instructions Manual

4) Press the <ENTER> button.
f The [KEYSTONE] individual adjustment screen is displayed.
5) Press asqw to adjust the item.
Items
Press the w button.
[H]
Press the q button.
Press the a button.
[V]
Press the s button.

[CORNER CORRECTION]

1) Press as to select [KEYSTONE].
2) Press the <ENTER> button.
f The [KEYSTONE] screen is displayed.
3) Press as to select [CORNER CORRECTION].
4) Press the <ENTER> button.
f The [CORNER CORRECTION] screen is displayed.
5) Press as to select the item to adjust, then press the <ENTER> button.
f The [CORNER CORRECTION] individual adjustment screen is displayed.
6) Press asqw to adjust.
[UPPER LEFT]
Note
f Either [KEYSTONE] or [CORNER CORRECTION] setting value is valid. When [KEYSTONE] or [CORNER CORRECTION]
adjustment is finished, you adjust the other one, the adjusted value will be reset.
f Press the <KEYSTONE> button on the remote control when the [KEYSTONE] or [CORNER CORRECTION] screen is
displaying, it will switch to the other adjustment screen.
f When the [CORNER CORRECTION] individual adjustment screen is displaying, the individual adjustment screen of the next
corner can also be displayed by pressing the <ENTER> button.
f Correcting up to ±40° for the tilt in the vertical direction and ±30° for the tilt in the horizontal are available for adjustments
with [KEYSTONE]. However, the image quality will degrade and it will get harder to focus with more correction. Install the
projector so that the correction will be as small as possible.
f Screen size will also change when [KEYSTONE] is used to perform various adjustments.
f Aspect ratio of the image size may shift depending on the correction.
Chapter 4 Settings - [POSITION] menu
Operation
Adjusts the right of
the keystone.
Adjusts the left of the
keystone.
Adjusts the upper of
the keystone.
Adjusts the bottom of
the keystone.
[CORNER CORRECTION]
[UPPER RIGHT]
Adjustment
[LOWER LEFT]
Adjustment range
-60 ~ +60
-80 ~ +80
[LOWER RIGHT]
ENGLISH - 57