Panasonic PT-VW350 Operating Instructions Manual page 93

[ECO management set up] page
You can make settings for the ECO management function of the projector.
Click [Detailed set up] → [ECO management set up].
1 [LAMP POWER]
Selects the [LAMP POWER] setting.
2 [AUTO POWER SAVE]
Select [ON] to set [AMBIENT LIGHT DETECTION],
[SIGNAL DETECTION], and [AV MUTE DETECTION].
3 [AMBIENT LIGHT DETECTION]
Enable ([ON])/disable ([OFF]) the ambient light
detection function.
4 [SIGNAL DETECTION]
Enable ([ON])/disable ([OFF]) the signal detection
function.
Note
f For detailed description of each setting item, refer to the [PROJECTOR SETUP] menu of the projector → [ECO
MANAGEMENT] (x page 71).
[Change password] page
Click [Change password].
1 [Administrator]
Used to change the setting of [Administrator].
2 [User]
Used to change the setting of [User].
Chapter 4 Settings - [NETWORK] menu
5 [AV MUTE DETECTION]
6 [POWER MANAGEMENT]
7 [TIMER]
8 [Submit]
3 [Next]
Enable ([ON])/disable ([OFF]) the AV mute detection
function.
Select the power consumption mode.
Select the time that the lamp is turned off when the
POWER MANAGEMENT function is using.
Update the setting.
Used to change the setting of the password.
ENGLISH - 93