Panasonic PT-VW350 Operating Instructions Manual page 92

Example of E-mail sent for an error
=== Panasonic projector report(ERROR) ===
Projector Type
Serial No
-----
FAN
INTAKE AIR TEMPERATURE
EXHAUST AIR
OPTICS MODULE TEMPERATURE
LAMP REMAIN TIME
LAMP STATUS
APERTURE (CONTRAST-SHUTTER)
AIR FILTER
(Error code
Intake air temperature
Exhaust air temperature
Optics module temperature
PROJECTOR RUNTIME
LAMP NORMAL
LAMP ECO
LAMP REMAIN
-------- Current status ---------
MAIN VERSION
NETWORK VERSION
SUB VERSION
LAMP STATUS
INPUT
----- Wired Network configuration -----
DHCP Client
IP address
MAC address
----- Memo -----
[Port set up] page
Set the port number used for command control.
Click [Detailed set up] → [Port set up].
1 [COMMAND PORT]
Set the port number used for command control.
2 [Wake on LAN PORT]
When [STANDBY MODE] is set to [NETWORK], set the
port number used for the Wake on LAN function.
92 - ENGLISH
Chapter 4 Settings - [NETWORK] menu
Mail with the contents shown below is sent when an error has occurred.
: PT-VW350
: 000000000
check system -----
TEMPERATURE
00 00 00 20 00 00 00
: 31 degC /
: 37 degC /
: 39 degC / 102 degF
800 H
500 H
700 H
4000 H
1.00
1.00
1.00
LAMP=OFF
RGB
OFF
192.168.10.100
04:20:9A:00:00:00
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ FAILED ]
00)
87 degF
98 degF
3 [Submit]
Update the settings.