Mac Filter Screen - ZyXEL Communications WZF56R16 User Manual

11.5 MAC Filter Screen

The MAC filter screen allows you to configure the NBG6816 to give exclusive access to devices
(Allow) or exclude devices from accessing the NBG6816 (Deny). Every Ethernet device has a
unique MAC (Media Access Control) address. The MAC address is assigned at the factory and
consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know
the MAC address of the devices to configure this screen.
To change your NBG6816's MAC filter settings, click Expert > Wireless > MAC Filter. The screen
appears as shown.
Figure 55 Expert > Wireless > MAC Filter
The following table describes the labels in this menu.
Table 33 Expert > Wireless > MAC Filter
LABEL
Band
SSID Select
MAC Address
Filter
Chapter 11 Wireless LAN
DESCRIPTION
Select the frequency band to set whether you want to apply the wireless and security
settings to the default 2.4GHz or 5GHz wireless LAN.
This shows the SSID for which you are configuring MAC filtering.
Select to turn on (Enable) or off (Disable) MAC address filtering.
NBG6816 User's Guide
93