ZyXEL Communications WZF56R16 User Manual page 109

Table 41 Expert > Applications > Parental Control > General: Add/Edit new rules (continued)
LABEL
Network
Service Setting
Add new
service
#
Service Name
Protocol:Port
Modify
Block Site/URL Keyword
Keyword
Keyword List
Apply
Back
13.2.1.2 Add/Edit a Service
Click Add new service in the Parental Control > Add new rules screen to add a new entry or
click the Edit icon next to an existing entry to edit it. Use this screen to configure a service rule.
Figure 66 Expert > Applications > Parental Control > General: Add/Edit new rules: Add new service
The following table describes the fields in this screen.
Table 42 Expert > Applications > Parental Control > General: Add/Edit new rules: Add new service
LABEL
Service Name
Protocol
Port
Chapter 13 Applications
DESCRIPTION
If you select Block, the NBG6816 prohibits the users from using the services listed below.
If you select Allow, the NBG6816 blocks all services except ones listed below.
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Port of the new rule.
This shows the index number of the rule. Select the checkbox next to the rule to activate it.
This shows the name of the service.
This shows the protocol and the port of the service.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Enter a keyword and click Add to add it to the keyword list. This has the NBG6816 block
access to the website URLs that contain the keyword.
Select a keyword and click Delete to remove it.
Click Clear All to remove all keywords from the keyword list.
Click Apply to save your settings back to the NBG6816.
Click Back to return to the previous screen.
DESCRIPTION
Select the name of the service. Otherwise, select UserDefined and manually specify the
protocol and the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP/
UDP.
Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
NBG6816 User's Guide
109