Figure 91 Expert > Maintenance > Remote Management > Remote Access
The following table describes the labels in this screen.
Table 58 Expert > Maintenance > Remote Management > WAN Access
LABEL
DESCRIPTION
WWW
Port
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Access Status
Select the interface(s) through which a computer may access the NBG6816 using this
service.
Secured Client
Select All to allow all computes to access the NBG6816.
IP Address
Otherwise, check Selected and specify the IP address of the computer that can access the
NBG6816.
Telnet
Chapter 15 Maintenance
NBG6816 User's Guide
141