Table of Contents
Advertisement
Make sure the power LED is on (not blinking).
1
Press the WPS button for more than three seconds and release it. Press the WPS button on another
2
WPS-enabled device within range of the NBG6816.
Note: You must activate WPS in the NBG6816 and in another wireless device within two
minutes of each other.
For more information on using WPS, see
1.7 LEDs
Figure 1 Front Panel
The following table describes the front panel LEDs.
Table 1 Front Panel LEDs
LED
Power/System
Chapter 1 Introduction
Power
COLOR
STATUS
DESCRIPTION
White
On
The NBG6816 is receiving power and functioning properly.
Blinking
The NBG6816 is in the process of starting up, default restoring,
or My ZyXEL Cloud Server online registration pairing.
Off
The NBG6816 is not receiving power.
NBG6816 User's Guide
Section 8.2 on page
Internet
5G WLAN/WPS
2.4G WLAN/WPS
12
46.
Advertisement
Table of Contents
