Table of Contents
Advertisement
Figure 77 Expert > Applications > File Sharing > FTP
The following table describes the labels in this screen.
Table 49 Expert > Applications > File Sharing > FTP
LABEL
DESCRIPTION
Enable FTP
Select this to enable the FTP server on the NBG6816 for file sharing using FTP.
Port
You may change the server port number for FTP if needed, however you must use the
same port number in order to use that service for file sharing.
User Accounts
Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
#
This is the index number of the user account.
Enable
This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
User Name
Enter a user name that will be allowed to access the shared files. You can enter up to 20
characters. Only letters and numbers allowed.
Password
Enter the password used to access the shared files. You can enter up to 20 characters.
Only letters and numbers are allowed. The password is case sensitive.
USB1/USB2
Specify the user's access rights to the USB storage device which is connected to the
NBG6816's USB port.
Read & Write - The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Read - The user has read rights only and can not create or edit the files on the
connected USB device.
None - The user cannot access the files on the USB device(s) connected to the USB
port.
Upstream
Enter the maximum bandwidth (in Kbps) allowed for incoming FTP traffic.
Bandwidth
Downstream
Enter the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic.
Bandwidth
Apply
Click Apply to save your changes back to the NBG6816.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 13 Applications
NBG6816 User's Guide
120
Advertisement
Table of Contents
