ZyXEL Communications WZF56R16 User Manual page 35

Table 15 Expert Mode: Status > System Status: Router Mode (continued)
LABEL
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP
IPv6 Address
WLAN 2.4G Information
WLAN OP Mode
MAC Address
SSID
Channel
Security
WLAN 5G Information
MAC Address
SSID
Channel
Security
Firewall
System Status
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
Interface Status
Interface
Status
Rate
Chapter 6 Router Mode
DESCRIPTION
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Server or Disable.
This shows the IPv6 address of the NBG6816 on the LAN.
This is the device mode (Section 4.1.2 on page
set - Access Point Mode.
This shows the 2.4GHz wireless adapter MAC Address of your device.
This shows a descriptive name used to identify the NBG6816 in the 2.4GHz wireless LAN.
This shows the channel number which you select manually.
This shows the level of wireless security the NBG6816 is using.
This shows the 5GHz wireless adapter MAC Address of your device.
This shows a descriptive name used to identify the NBG6816 in the 5GHz wireless LAN.
This shows the channel number which you select manually.
This shows the level of wireless security the NBG6816 is using.
This shows whether the firewall is enabled or not.
This is the total time the NBG6816 has been on.
This field displays your NBG6816's present date and time.
This displays what percentage of the NBG6816's processing ability is currently used. When
this percentage is close to 100%, the NBG6816 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
This shows what percentage of the heap memory the NBG6816 is using.
This displays the NBG6816 port types. The port types are: WAN, LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
For the LAN ports, this displays the port speed and duplex setting or is left blank when the
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation. This field displays N/A when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.
NBG6816 User's Guide
25) to which the NBG6816's wireless LAN is
35