Number) in the devices. Then, they connect and set up a secure network by themselves. See how
to set up a secure wireless network using WPS in the
11.2 Wireless Screen
Use this screen to configure the SSID and wireless security of the NBG6816's default wireless LAN.
Note: If you are configuring the NBG6816 from a computer connected to the wireless LAN
and you change the NBG6816's SSID, channel or security settings, you will lose
your wireless connection when you press Apply to confirm. You must then change
the wireless settings of your computer to match the NBG6816's new settings.
Click Expert > Wireless.
Figure 49 Expert > Wireless
The following table describes the general wireless LAN labels in this screen.
Table 27 Expert > Wireless
LABEL
Wireless Setup
Band
Wireless LAN
Chapter 11 Wireless LAN
DESCRIPTION
Select the frequency band to set whether you want to apply the wireless and security
settings to the default 2.4GHz or 5GHz wireless LAN.
Select Enable to activate the 2.4GHz and/or 5GHz wireless LAN. Select Disable to turn it
off.
You can enable or disable both 2.4GHz and 5GHz wireless LANs by using the WIFI button
located on the back panel of the NBG6816.
NBG6816 User's Guide
85
Section 8.2 on page
46.