Activating Vectors-To-Final - Garmin G3X Touch Pilot's Manual

ACTIVATING VECTORS-TO-FINAL

After an approach has been activated, Activate Vectors-to-Final is used when being
vectored to the final approach course by Air Traffic Control (ATC).
The G3X Touch creates an extension of the final course, beyond the final approach
waypoint in the database (final approach fix [FAF]). On the Active Flight Plan Page, a
Vector to Final symbol appears beside the first approach waypoint.
Vectors-
to-Final
Symbol
The G3X Touch does not provide guidance to the inbound course. The course
deviation needle on the graphic HSI remains off-center until established on the final
approach course. The map shows an extension of the final approach course using a
bold magenta line.
If Activate Vectors-to-Final is not selected, the G3X Touch creates a straight-line
course directly to the first waypoint in the approach.
Loading the approach cancels the Direct-to and initiates a route to the FAF.
190-01754-00 Rev. E
Vectors-to-Final
Vectors-to-Final
Garmin G3X Touch Pilot's Guide
Flight Planning
Final Course
Extension
133