Activating Vectors-To-Final - Garmin GPSMAP 695 Owner's Manual

Flight Planning
loading/Activating an approach from the Direct-to Window or
Waypoint Page:
1) Press the Direct-to Key or select the Waypoint Page.
2) Press the MENU Key.
3) Turn or move the FMS Joystick to highlight 'Select Approach', and press
the ENT Key. If an approach is not already loaded or activated, the cursor
is displayed in the Approach Field. If an approach is already loaded or
activated, 'Activate' is highlighted.
4) With 'Activate' highlighted press the ENT Key, or select an approach,
highlight 'Load Approach' or 'Activate Approach', and press the ENT Key.
Removing an approach:
1) Press the FPl Key.
2) Turn the FMS Joystick to display the Active Flight Plan Page or Saved Flight
Plan Page.
3) Press the RMv APPR Softkey; or press the MENU Key, highlight 'Remove
Approach' by turning or moving the FMS Joystick, and press the ENT Key.

activatiNG vectOrS-tO-FiNal

After an approach has been activated, the vECTORS Softkey is used when being
vectored to the final approach course by Air Traffic Control (ATC).
If the vECTORS Softkey is selected, the GPSMAP 695/696 creates an extension of
the final course, beyond the final approach waypoint in the database (final approach
fix [FAF]). On the Active Flight Plan Page, a Vector to Final symbol appears beside the
first approach waypoint.
90
Garmin GPSMAP 695/696 Owner's Manual 190-00919-00 Rev. D