Adjusting The Color Mode - Garmin G3X Touch Pilot's Manual

6)
Touch and drag the slider to the desired percentage.
The Color Mode setting is used to adjust the color brightness used on the map and
synthetic vision display for day or night use.

Adjusting the color mode:

1) Press the MENU Key twice.
2) Touch Setup > Display.
3)
Touch and drag the menu to scroll down.
4) Touch Day, Night, or Auto in the 'Color Mode' Field.
Setting the Startup Page
1) Press the MENU Key twice.
2) Touch Setup > Display.
3)
Touch the 'PFD Startup Page' Field.
4) Touch Split or Auto.
Configuring the PFD inset window:
1) From the full screen PFD, touch the MENU Key.
2) Touch the left or right Inset Window Button.
3) Touch the desired option from the menu.
EIS DISPLAY LOCATION (OPTIONAL)
In Configuration Mode the 'EIS Display Location' setting can be set to one of the
following:
• AUTO—Displays the EIS Strip on the MFD, or on the PFD1 (and PFD2 if applicable)
if the MFD is not displayed.
• PFD—Always displays the EIS Strip on PFD1 (and PFD2 if applicable).
• User Selected—Enables the user to choose between 'AUTO' and 'PFD' via the
Display Setup menu.
For more information on how to enable the 'EIS Display Location' setting in
Configuration Mode refer to the G3X Touch Installation Manual.
190-01754-00 Rev. E Garmin G3X Touch Pilot's Guide
System Overview
29