Approaches (Without External Navigator Configured) - Garmin G3X Touch Pilot's Manual

Flight Planning
Exporting flight plans:
1) Press the MENU Key twice.
2) Touch FPL List.
3) Touch the desired saved flight plan.
4) Press the Menu Key.
5) Touch Export Flight Plan.
6.6 APPROACHES (WITHOUT EXTERNAL
NAVIGATOR CONFIGURED)
WARNING: Do not use the approach information provided by the VFR naviga-
tion database residing within the G3X Touch as a means of navigating any
instrument approach. The G3X Touch VFR navigation database is limited to
present only the waypoints for the final approach leg of a published procedure.
These waypoints and associated course line are made available for monitoring
purposes only.
NOTE: This section is not applicable if an external GPS navigator is configured.
Approach configuration is handled via the external GPS navigator's controls
only. Refer to the external GPS navigator's Pilot's Guide for more information.
An approach can be loaded at any airport that has one available, and provides
situational awareness for non-precision and precision approaches to airports with
published instrument approach procedures. Only one approach can be loaded at a
time in a flight plan. If an approach is loaded when another approach is already in the
active flight plan, the new approach replaces the previous approach.
Whenever an approach is selected, the choice to either "Load Approach" or "Activate
Approach" is given. "Load Approach" adds the approach to the end of the flight plan
without immediately using it for navigation guidance. This allows continued navigation
via the intermediate waypoints in the original flight plan, but keeps the procedure
available on the Active Flight Plan Page for quick activation when needed. "Activate
Approach" also adds the procedure to the end of the flight plan but immediately
begins to navigate to the first waypoint in the approach.
130
Garmin G3X Touch Pilot's Guide 190-01754-00 Rev. E