Activating Vectors-To-Final - Garmin G300 Pilot's Manual

Removing an approach:
1) Press the FPL Key.
2) Turn the FMS Joystick to display the Active Flight Plan Page or Saved
Flight Plan Page.
3) Press the RMV APPR Softkey; or press the MENU Key, highlight
'Remove Approach' by turning or moving the FMS Joystick, and press
the ENT Key.

aCtivating veCtOrS-tO-Final

After an approach has been activated, the VECTORS Softkey is used when
being vectored to the final approach course by Air Traffic Control (ATC).
If the VECTORS Softkey is pressed, the G300 creates an extension of the final
course, beyond the final approach waypoint in the database (final approach fix
[FAF]). On the Active Flight Plan Page, a Vector to Final symbol appears beside
the first approach waypoint.
Vectors-to-Final
Symbol
190-00921-00 Rev. D
Vectors-to-Final (Active Flight Plan Page)
(Single Display)
Garmin G300 Pilot's Guide
Flight Planning
VECTORS Softkey
129