Section 4 Cns Interface; Auto-Tuning Frequencies (Optional) - Garmin G3X Touch Pilot's Manual

SECTION 4 CNS INTERFACE

4.1 AUTO-TUNING FREQUENCIES (OPTIONAL)

NOTE: Refer to the G3X Touch Installation Manual for more information on
the G3X Touch optional communication interfaces.
Frequencies can be automatically tuned from the following:
• Map Page
• Weather Page
• Waypoint Page
• Nearest Airports Page
Auto-tuning a frequency:
1) Touch the page navigation bar on the MFD.
2) Touch Waypoint.
3) Touch the waypoint identifier field at the top of the page.
4) Enter the desired waypoint and touch Enter.
5) Touch Freq.
6) Touch the desired frequency to tune.
7) OPTIONAL: Touch the desired COM radio if configured with more than one.
Or:
1) Touch the page navigation bar on the MFD
2) Touch Map or SXM Weather.
3) Touch the desired waypoint or airport on the map.
4) Touch the selected waypoint identifier name below the map.
5) Touch Freq.
6) Touch the desired frequency to tune.
7) OPTIONAL: Touch the desired COM radio if configured with more than one.
Or:
190-01754-00 Rev. E
• Nearest Airport Weather Page
• Nearest VOR Page
• Nearest Airspace Page
Garmin G3X Touch Pilot's Guide
CNS Interface
79