Garmin G3X Touch Pilot's Manual page 201

Disabling/Enabling the traffic alerts:
NOTE: Traffic alerts are reset to 'enabled' on the next power cycle.
1) From the Traffic Page, press the MENU Key.
2) Touch Alerts to toggle between Enabled and Inhibited.
t w
raFFiC arning
The Traffic Warning Window is shown, when the GDL 39/39R issues a traffic advisory
(TA). The Traffic Warning Window shows a small pop-up map in the lower left corner.
The Range Rings on the pop-up alert are spaced every whole mile/kilometer/nautical
mile.
DISPLAYING TRAFFIC DATA
Traffic is displayed by default on the Map Page and in the Traffic Warning Window.
Traffic Symbol and Traffic Label (i.e., relative altitude, altitude trend and absolute
motion vectors) settings selects the maximum range at which traffic labels or symbols
are shown. Traffic Labels can also be turned off.
Traffic information is also displayed on the PFD when Synthetic Vision is enabled.
See the 'Additional Features' Section for more information.
Enabling/disabling traffic data on the Map Page:
1) From the Map Page, press the MENU Key.
2) Touch Traffic.
Customizing traffic data on the Map Page:
1) From the Map Page, press the MENU Key.
2) Touch Set Up Map.
3) Touch and swipe the tabs to find the Traffic Tab.
4) Touch the Traffic Tab.
5) Touch the Traffic Data
6) Touch On or Off.
7) Touch the Traffic Symbol
8) Touch Auto or a range option.
190-01754-00 Rev. E
w
inDow
to view a list of options.
to view a list of options.
Garmin G3X Touch Pilot's Guide
Hazard Avoidance
183