Selected Altitude Intercept Arc; Measuring Bearing And Distance - Garmin G3X Touch Pilot's Manual

SELECTED ALTITUDE INTERCEPT ARC

The map can display the location along the current track where the aircraft will
intercept the selected altitude. The location will be shown as a cyan arc when the
aircraft is climbing or descending.
Displaying/removing the selected altitude intercept arc:
1) With the Map Page displayed, press the MENU Key.
2) Touch Set Up Map.
3) Touch and drag the tabs left or right to find the desired tab.
4) Touch the 'Map' Tab.
5) In the Selected Altitude Intercept Arc field, touch On or Off.

MEASURING BEARING AND DISTANCE

Distance and bearing from the aircraft's present position to any point on the viewable
navigation map may be calculated using the 'Measure Distance' option from Map Page
menu. The distance tool displays a dashed Measurement Line and a Map Pointer to aid
in graphically identifying points to measure. Lat/Long, bearing, distance, and elevation
data is provided.
Measuring bearing and distance between any two points:
1) From the Map Page, press the MENU Key.
2) Touch Measure Distance.
3) Touch any point on the viewable navigation map.
4) If desired, touch Set Ref to set a reference point.
190-01754-00 Rev. E
Navigation Map
Garmin G3X Touch Pilot's Guide
GPS Navigation
Selected
Altitude
Intercept
Arc
101