Removing the side cover
To remove the cover, you might find it easier to lay the computer on its side.
Complete the following steps to remove the side cover of the computer:
1. Review the "Installation guidelines" on page 23.
2. Turn off the computer and all attached devices (see "Turning off the computer"
3. Pull down on the cover-release handle; then, pull the cover straight up and lift
To replace the side cover, see "Replacing the side cover" on page 51.
Attention:
the computer. Operating the computer with the cover removed might damage
computer components.
on page 9); then, disconnect all power cords and external cables.
the side cover off the computer and set it aside.
Cove-release
handle
For proper cooling and airflow, replace the side cover before turning on
Chapter 4. Installing options
25