Rear-Adapter Retention Bracket - IBM IntelliStation Z Pro 6223 Hardware Maintenance Manual And Troubleshooting Manual

Rear-adapter retention bracket

Before you begin:
v Read Appendix B, "Safety information," on page 125.
v Review the information in "System reliability considerations" on page 23.
To remove the rear-adapter retainer, complete the following steps:
1. Turn off the computer, if it is on.
2. Disconnect the power cord from the power source and from the computer; then,
3. Remove the side cover (see "Removing the side cover" on page 25).
4. Remove all adapters (see "Installing an adapter" on page 26).
5. Grasp the rear adapter retainer, and gently slide the top and bottom tabs out of
To replace the rear adapter retainer, reverse the steps.
disconnect all external cables.
the notches.
Rear adapter
retention bracket
Chapter 5. Field replaceable units
63