Installing A Second Microprocessor - IBM IntelliStation Z Pro 6223 Hardware Maintenance Manual And Troubleshooting Manual

Installing a second microprocessor

Your computer comes with one microprocessor installed on the system board. Your
computer supports up to two microprocessors. With two microprocessors, your
computer can operate as a symmetric multiprocessing (SMP) computer. With SMP,
certain operating systems and application programs can distribute the processing
load among the microprocessors.
Note: When installing microprocessor options, lay the computer on its side.
The following notes describe information that you must consider when installing an
additional microprocessor in your computer:
v Read the documentation that comes with the microprocessor to determine
v (Optional) Obtain an SMP-capable operating system. For a list of supported
v To ensure proper computer operation, use microprocessors that have the same
v The microprocessor speeds are automatically set for this computer; therefore,
v Terminator cards are not required for empty microprocessor sockets. However,
v If you need to replace a microprocessor, see "Microprocessor and heat sink" on
v For additional illustrations of the system-board components, see "System board
v To order additional microprocessor options, contact your IBM marketing
v For a list of supported microprocessor options for your computer, go to
The Microsoft Windows XP operating system that comes preinstalled on your
computer automatically configures itself when an additional microprocessor is
installed. Other operating systems might have to be manually configured to support
an additional microprocessor. See the User's Guide on the IBM IntelliStation
Documentation CD for instructions.
Complete the following steps to install an additional microprocessor:
44
IntelliStation Z Pro Types 6223 and 6227: Hardware Maintenance Manual and Troubleshooting Guide
whether you need to update the computer basic input/output system (BIOS)
code. The most current level of BIOS code for the computer is available from
http://www.ibm.com/pc/support/.
operating systems, go to http://www.ibm.com/pc/us/compat/.
cache size and type, and the same clock speed. Microprocessor internal and
external clock frequencies must be identical. You can use the
Configuration/Setup Utility program in your computer to determine the specific
type of microprocessor on your system board.
Important: The first microprocessor must always be installed in the
Microprocessor 1 socket.
you do not need to set any microprocessor frequency-selection jumpers or
switches.
for airflow, an empty microprocessor socket must contain a microprocessor
baffle.
page 60.
option connectors" on page 71.
representative or authorized reseller.
http://www.ibm.com/pc/; then, select your country and navigate to the list of
options for your computer
1. Read the safety information beginning on page 125 and the guidelines in
"Handling static-sensitive devices" on page 23.
2. Turn off the computer and all attached devices. (See "Turning off the
computer" on page 9.)