Ethernet Encapsulation; Figure 245 Menu 11.1: Remote Node Profile For Ethernet Encapsulation; Table 168 Menu 11.1: Remote Node Profile For Ethernet Encapsulation - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 User's Guide

31.3.1 Ethernet Encapsulation

There are three variations of menu 11.1 depending on whether you choose Ethernet
Encapsulation, PPPoE Encapsulation or PPTP Encapsulation. You must choose the
Ethernet option when the WAN port is used as a regular Ethernet. The first menu 11.1 screen
you see is for Ethernet encapsulation shown next.

Figure 245 Menu 11.1: Remote Node Profile for Ethernet Encapsulation

Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Server= N/A
Relogin Every (min)=
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.

Table 168 Menu 11.1: Remote Node Profile for Ethernet Encapsulation

FIELD
Rem Node Name Enter a descriptive name for the remote node. This field can be up to eight
Active
Encapsulation
Service Type
Outgoing
My Login
My Password
Retype to
Confirm
432
N/A
DESCRIPTION
characters.
Press [SPACE BAR] and then [ENTER] to select Yes (activate remote node) or No
(deactivate remote node).
Ethernet is the default encapsulation. Press [SPACE BAR] and then [ENTER] to
change to PPPoE or PPTP encapsulation.
Press [SPACE BAR] and then [ENTER] to select from Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner
Manager authentication method), RR-Telstra or Telia Login. Choose one of the
RoadRunner methods if your ISP is Time Warner's RoadRunner; otherwise choose
Standard.
This field is applicable for PPPoE encapsulation only. Enter the login name
assigned by your ISP when the ZyWALL calls this remote node. Some ISPs append
this field to the Service Name field above (e.g., jim@poellc) to access the PPPoE
server.
Enter the password assigned by your ISP when the ZyWALL calls this remote node.
Valid for PPPoE encapsulation only.
Type your password again to make sure that you have entered it correctly.
Route= IP
Edit IP= No
Session Options:
Schedules=
Edit Filter Sets= No
Edit Traffic Redirect= No
Chapter 31 Remote Node Setup