Table 5 Screens Summary - ZyXEL Communications ZyWALL 5 User Manual

Table 4 Bridge and Router Mode Features Comparison
FEATURE
Remote Management
UPnP
Logs
Maintenance
Table Key: An O in a mode's column shows that the device mode has the specified feature.
The information in this table was correct at the time of writing, although it may be subject to
change.
The following table describes the sub-menus.

Table 5 Screens Summary

LINK
HOME
LAN
BRIDGE
WIRELESS LAN Wireless
WAN
DMZ
FIREWALL
Chapter 2 Introducing the Web Configurator
BRIDGE MODE
O
O
O
TAB FUNCTION
This screen shows the ZyWALL's general device and network
status information. Use this screen to access the wizards, statistics
and DHCP table.
LAN Use this screen to configure LAN DHCP and TCP/IP settings.
Static DHCP Use this screen to assign fixed IP addresses on the LAN.
IP Alias Use this screen to partition your LAN interface into subnets.
Port Roles Use this screen to change the LAN/DMZ port roles
Bridge Use this screen to change the bridge settings on the ZyWALL.
Port Roles Use this screen to change the LAN/DMZ port roles
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
MAC Filter Use this screen to change MAC filter settings on the ZyWALL
Route This screen allows you to configure route priority and traffic redirect
properties.
WAN Use this screen to configure ZyWALL WAN port for internet
access.
Traffic Redirect Use this screen to configure your traffic redirect properties and
parameters.
Dial Backup Use this screen to configure the backup WAN dial-up connection
DMZ Use this screen to configure your DMZ connection.
IP Alias Use this screen to partition your DMZ interface into subnets
Port Roles Use this screen to change the LAN/DMZ port roles
Default Rule Use this screen to activate/deactivate the firewall and the direction
of network traffic to which to apply the rule
Rule Summary This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
Anti-Probing Use this screen to change your anti-probing settings.
Threshold Use this screen to configure the threshold for DoS attacks.
ZyWALL 5 User's Guide
ROUTER MODE
O
O
O
O
63