WAN and Dial Backup Setup
This chapter describes how to configure the WAN using menu 2 and dial-backup using menus
2.1 and 11.1.
27.1 Introduction to WAN and Dial Backup Setup
This chapter explains how to configure settings for your WAN port and how to configure the
ZyWALL for a dial backup connection.
27.2 WAN Setup
From the main menu, enter 2 to open menu 2.
Figure 221 MAC Address Cloning in WAN Setup
Chapter 27 WAN and Dial Backup Setup
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:
C
H A P T E R
ZyWALL 5 User's Guide
2 7
403