Viewing Lan Ip Address; Figure 191 Protocol/Port Report Example; Table 132 Protocol/ Port Report - ZyXEL Communications ZyWALL 5 User Manual

Hide thumbs Also See for ZyWALL 5:

Table of Contents

The following table describes the labels in this screen.

Protocol/Port

23.4.3 Viewing LAN IP Address

In the Reports screen, select LAN IP Address from the Report Type drop-down list box to

have the ZyWALL record and display the LAN IP addresses that the most traffic has been sent

to and/or from and how much traffic has been sent to and/or from those IP addresses.

Note: Computers take turns using dynamically assigned LAN IP addresses. The

ZyWALL continues recording the bytes sent to or from a LAN IP address when

it is assigned to a different computer.

Chapter 23 Logs Screens

This column lists the protocols or service ports for which the most traffic has gone

through the ZyWALL. The protocols or service ports are listed in descending order with

the most used protocol or service port listed first.

This field displays Incoming to denote traffic that is coming in from the WAN to the

LAN or DMZ. This field displays Outgoing to denote traffic that is going out from the

LAN or DMZ to the WAN.

This column lists how much traffic has been sent and/or received for each protocol or

service port. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies

with the amount of traffic for the particular protocol or service port. The count starts

over at 0 if a protocol or port passes the bytes count limit

ZyWALL 5 User's Guide

(Table 134 on page