Table 35 System Error Logs - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 User's Guide
Table 34 System Maintenance Logs (continued)
LOG MESSAGE
Configuration Change: PC =
0x%x, Task ID = 0x%x
Successful SSH login
SSH login failed
Successful HTTPS login
HTTPS login failed
DNS server %s was not responding to
last 32 consecutive queries...
DDNS update IP:%s (host %d)
successfully
SMTP successfully

Table 35 System Error Logs

LOG MESSAGE
%s exceeds the max.
number of session per
host!
setNetBIOSFilter: calloc
error
readNetBIOSFilter: calloc
error
WAN connection is down.
Dial Backup starts
Dial Backup ends
DHCP Server cannot assign the
static IP %S (out of range).
The DHCP static IP %s is conflict. The static DHCP IP address conflicts with another host.
SMTP fail (%s)
SMTP authentication fail (%s)
640
DESCRIPTION
The router is saving configuration changes.
Someone has logged on to the router's SSH server.
Someone has failed to log on to the router's SSH server.
Someone has logged on to the router's web configurator
interface using HTTPS protocol.
Someone has failed to log on to the router's web configurator
interface using HTTPS protocol.
The specified DNS server did not respond to the last 32
consecutive queries.
The device updated the IP address of the specified DDNS
host name.
The device sent an e-mail.
DESCRIPTION
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
The router failed to allocate memory for the NetBIOS filter settings.
The router failed to allocate memory for the NetBIOS filter settings.
A WAN connection is down. You cannot access the network
through this interface.
Dial backup started working.
Dial backup stopped working.
The LAN subnet, LAN alias 1, or LAN alias 2 was changed and the
specified static DHCP IP addresses are no longer valid.
The device failed to send an e-mail (error message included).
The device failed to authenticate with the SMTP server (error
message included).
Appendix Q Log Descriptions