Configuring A Server Behind Nat; Figure 260 Menu 15.1.1.1: Editing/Configuring An Individual Rule In A Set; Table 177 Menu 15.1.1.1: Editing/Configuring An Individual Rule In A Set - ZyXEL Communications ZyWALL 5 User Manual

Figure 260 Menu 15.1.1.1: Editing/Configuring an Individual Rule in a Set

Menu 15.1.1.1 Address Mapping Rule
Type= One-to-One
Local IP:
Global IP:
Server Mapping Set = N/A
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.

Table 177 Menu 15.1.1.1: Editing/Configuring an Individual Rule in a Set

FIELD
Type
Local IP
Start
End
Global IP
Start
End
Server
Mapping
Set
Once you have finished configuring a rule in this menu, press [ENTER] at the message "Press ENTER
to Confirm..." to save your configuration, or press [ESC] to cancel.

33.3 Configuring a Server behind NAT

Note: If you do not assign a Default Server IP address, the ZyWALL discards all
packets received for ports that are not specified here or in the remote
management setup.
Chapter 33 Network Address Translation (NAT)
Start=
End = N/A
Start=
End = N/A
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select from a total of five types. These are the
mapping types discussed in
servers of different types behind NAT to this computer. See
an example.
Only local IP fields are N/A for server; Global IP fields MUST be set for Server.
Enter the starting local IP address (ILA).
Enter the ending local IP address (ILA). If the rule is for all local IPs, then put the Start IP as
0.0.0.0 and the End IP as 255.255.255.255. This field is N/A for One-to-One and Server
types.
Enter the starting global IP address (IGA). If you have a dynamic IP, enter 0.0.0.0 as the
Global IP Start. Note that Global IP Start can be set to 0.0.0.0 only if the types are Many-
to-One or Server.
Enter the ending global IP address (IGA). This field is N/A for One-to-One, Many-to-One
and Server types.
This field is available only when you select Server in the Type field.
Chapter 17 on page 281. Server allows you to specify multiple
ZyWALL 5 User's Guide
Section 33.4.3 on page 453 for
449