The following table describes the labels in this screen.
Table 89 Local User Database
LABEL
Active
User Name
Password
Apply
Reset
16.5 Configuring RADIUS
Use RADIUS to authenticate users using an external server.
Click AUTH SERVER, then the RADIUS tab to open the following screen where you can set
up your ZyWALL's RADIUS server settings.
Figure 134 RADIUS
Chapter 16 Authentication Server
DESCRIPTION
Select this check box to enable the user profile.
Enter the user name of the user profile.
Enter a password up to 31 characters long for this user profile.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 5 User's Guide
279