Image Colors Are Not Right; Images Appear Dark; Image Colors Are Not Right S; Images Appear Dark S - Epson EB-L1505U User Manual

Problem Solving

Image colors are not right

Check
Do the input signal settings match the signals from the connected
device?
Is the image brightness adjusted correctly?
Are the cables connected correctly?
g
Is the Contrast adjusted correctly?
Is the color adjustment set correctly?
Are the color saturation and tint adjusted correctly?
Is the brightness of the room appropriate?

Images appear dark

Check
Is the image brightness set correctly?
g
Is the Contrast adjusted correctly?
Change the setting according to the signal for the connected equipment.
s Signal - Advanced - Input Signal
Adjust the Brightness setting from the Configuration menu.
s Image - Brightness p.127
Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.45
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.127
Adjust the Gamma or RGBCMY setting from the Configuration menu.
s Image - Advanced p.127
s "Adjusting the Image" p.80
Adjust the Color Saturation and Tint settings from the Configuration menu.
s Image - Color Saturation, Tint p.127
If the room is darker than when the auto adjustment was performed, the tint of the projected images may not be displayed
correctly. Make the room darker and then perform auto adjustment again.
s "Screen Matching" p.99
s "Color Calibration" p.188
Check the Brightness and Brightness Settings values from the Configuration menu.
s Image - Brightness p.127
s Settings - Brightness Settings p.131
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.127
Remedy
p.129
Remedy
175